Varin 60 provides a constant speed through transfer and seaming turret with positive assembly of can and cover when closing at high speeds. The seaming rolls in the sixth station turret are assembled using tapered roller bearings and actuated separately by single fixed can. Second operation rolls can be disengaged by single movement for checking the first operation. Parts are easily accessible for cleaning, lubrication, and maintenance.

Product Specifications:
Min-Max Can Diameter: 200-404 (50-108mm)
Min-Max Can Height: 108-700 (38-178mm)
Capacity Per Minute: 500 cpm
Motor Power: 7.5-10HP
Electrical Controls: 308V/50hz
Machine Dimension: W140xL260xH180cm
Net Weight: 2,200kg
Epoxy Powder Coating

Spare Parts:
2nd Operation seaming rolls
1st Operation seaming rolls
Seamin Roll lever S/S
Knock out Rod Pin
Lower Driven
Cap feed turret drive pinion
Separator drive gear

The Model 60L Angelus seamer incorporates a base-mounted stainless-steel machine enclosure, with door interlocks. This machine is rated for speeds up to 500 CPM

Standard Features:
Six seaming stations
One set of can and end change parts
Single roll cover separator
Gear-driven lower lifters with a seven-point lubrication system
Second operation off-seam setting
Automatic stop control system
Grease lubrication
PLC and touch screen control
Pneumatic no can/no cover feed
Variable speed motor drive
Tool kit and instruction manual

Varin Seamer Parts
Over 40 years of experience in making parts for can seamers, we are the only company who offers spare parts for Angelus and Canco seaming machines from can size 200-603 DIA. Gear teeth’s surface is to be ground for upgrading the quality of your seamer to reduce unnecessary noise in the factory, cap guide rails, turrets, seaming heads, feed disc, and feed arms.

Our seaming rollers and seaming chucks are used extensively throughout the canning and can-making industry. The use of imported German stainless steel guarantees a long service life while our CNC profile grinders, custom built in the USA exclusively seal precision, ensures consistent profiles with every order.

Available for All of Seamers:
Angelus
Canco
Cevolani
Comaco
Continental
Klinghammer
Ferrum
FMC
John Heine
Lanico
Lubeca
Metal Box
Mitsubishi
Dixie
Sabatier
Sima
Somme
Shin-i

The Can Stripper with motor drive is used to cut the Cover Hook and separate it from Body Hook. Use on round can and maintain properly seam to measure Cover Hook and Body Hook, visual inspection of Pleats, Puckers, and Wrinkles. Can Stripper keep the products in good condition, easier & faster, safer, and cost-saving concern.

Product Specifications:
Minimum Can Diameter 200 (50 mm)
Maximum Can Diameter 603 (153 mm)
Motor Power 1/3 Hp Electrical Controls 220V/50 Hz
Machine Dimension W21 x 41 x 56 cm
Net Weight 21 kg

STR-1000 Seam Stripper

Manufactured by CMC KUHNKE

The Automatic Can Seam Stripper is an efficient and affordable alternative to manual teardown methods for the analysis of Double Seam Tightness on Food, Beverage or Aerosol Cans

Features:
May be used on Aluminum or Steel Cans
Toolings changed easily for different can sizes

Product Specifications:
Electrical Power Required: 220V/50Hz 115V/60HZ
Weight: 70 lbs.
Min. Size: 200
Maximum Size: 603 (135mm)
Dimensions: 400 x 260 x 610 mm (16 x10x24 in)

Shredamatic Industrial Cooked Meat Shredder

Manufactured by Pacific Food Machinery

The Shredamatic Industrial Cooked Meat Shredder is a highly efficient “pulled meat” shredding machine that is perfect for processing large volumes of cooked meat, such as pulled pork, beef, and shredded cooked chicken. It has unique removable combs specially designed to allow shredding of smaller products, such as cubed beef, pork, or chicken thigh fillets, small fillets of fish, and other small, cooked proteins that require shredding. The Shredamatic is designed to shred hot cooked meat, it will not shred chilled meat effectively.

Product Specifications:
Model: Shredamatic (Industrial)
Capacity: Roughly up to 1200-1400kg/hr
Power: 415V 50Hz, 3Ph
Overall Dimensions: 2300 x 1100 x 2000mm

ABB is a company operating mainly in robotics, power, heavy electrical equipment, and automation technology areas.

Featured Products:
Magnetic Contactor UA95-30-00RA-80
A 3-phase contactor suitable for capacitor switching application. Maximum permissible peak current 100 times the nominal RMS current. Operated with a control voltage, versions from 240 V to 690 V.

Specifications:
Rated Operational Voltage: Main Circuit 1000 V
Rated Frequency (f): Main Circuit 50 Hz

Coriolis Mass Flowmeter
A wide range of meter sizes provides precise measurement of mass flow, volume flow, density, temperature, and concentration. ABB´s CoriolisMaster series has a history of success in a wide variety of industries and applications. With innovations like Sensor Application Memory, Easy Set-up, and with up to 5 modular I/Os – they save time and money during installation, commissioning, and maintenance.

Power Factor Controller RVC
Comes with: Direct connection for all network voltages from 100 V to 440 V. Connection to higher network voltages possible through voltage transformer. Measurement and display of key parameters (voltage, current, power factor, THDV, and THDI)

Allen-Bradley manufactures programmable logic controllers (PLCs), human-machine interfaces, sensors, safety components and systems, software, drives and drive systems, contactors, and motor control centers.

Photo Electronic Sensor
– use a beam of light to detect the presence or absence of an object. This technology is an ideal alternative to inductive proximity sensors

PhotoSwitch Photoelectric Sensor, Standard (On / Off), Standard Diffuse, 1.52m (5ft), 10-40V DC, NPN/PNP Transistor, 4-pin DC Micro (M12) QD

Specifications:
Output Function: Standard (On / Off)
Sensing Mode: Standard Diffuse
Maximum Sensing Distance: 1.52m (5ft) with White Paper 216mm x 279.4mm (8.5in x 11in)
Operating Voltage/Output Type: 10-40V DC, NPN/PNP Transistor
Connection Type: 4-pin DC Micro (M12) QD

Powerflex 525 AC Drive – 25B D1P4N104
– The PowerFlex® 520-Series AC drive delivers an innovative design that is remarkably versatile and can accommodate systems ranging from standalone machines to simple system integration. The PowerFlex 523 drive provides general-purpose control for applications ranging up to 30 HP and 22 kW. The PowerFlex 525 drive provides maximum flexibility and performance ranging up to 30 HP and 22 kW.

Specifications:
Voltage Class: 480 VAC, 3 Phase
Output Current: 1.4 Amps
Enclosure Type: IP20 NEMA / Open Type
Frame Size: Frame A
Interface Module: Standard
Interface Module: No filter
Input: Three Phase 380-480V

Servo Motor MPL-A430H-HJ72AA
– Bulletin MPL – Low-Inertia Brushless Servo Motors Product, 230 V, Frame Size 4 = 115 mm (4.53 in.), Stack Length 30 = 76.2 mm (3.0 in.), 3500 RPM, 2000 Line Incremental Encoder. Keyed Shaft Extension, SpeedTEC DIN Connector, Right Angle, 180° Rotatable (Quick Connect), No Brake, IEC Metric, Free Mounting Holes (Type FF)

Specifications:
Voltage: 230v
Frame Size: 4 = 115 mm (4.53 in.)
Magnet Stack Length: 30 = 76.2 mm (3.0 in.)
RPM: 3500 RPM
Feedback: 2000 Line Incremental Encoder
Enclosure: Keyed Shaft Extension
Connectors: SpeedTEC DIN Connector, Right Angle, 180° Rotatable (Quick Connect)
Brake Option: No Brake

800T/H Operators
– Provides 30.5 mm mounting hole
– Offers Type 4/13 watertight/oil-tight (Bulletin 800T)
– Offers Type 4/4X/13 corrosion-resistant/watertight/oil-tight (Bulletin 800H)
– Includes heavy industrial stations and operators
– Includes universal LED for simplified product selection and increased flexibility
– Offers 800TC-XAF explosion-protected contact block for Class I Division 2 hazardous location

Danfoss is a world-class provider of mobile hydraulic and electrification products and solutions.

Products:
Industrial Pressure Transmitter
Features and Benefits:
High EMC performance without impact on accuracy
High level of vibration and shock stability
Long term stability
High level of over-pressure stability
High IP degree
Wide choice of pressure connections, electrical connections, pressure ranges, output signal
Available with marine approvals

Industrial Temperature Sensor
Features and Benefits:
High degree of protection against moisture
Measuring temperatures – 50° C to 800° C
Fixed or changeable measuring insert
Pt 100 / Pt 1000 resistance element, NTC / PTC, and Thermocouples
Built-in transmitter available
Available with marine approvals

VLT Automation Drive
Featured and Benefits:
A wide operating temperature range of -25°C to +50°C without derating ensures reliable operation when your applications take your drive to the extremes
The flexible, modular design concept provides an extraordinarily versatile motor control solution
The new VLT®Wireless Communication Panel LCP 103 communicates wirelessly with MyDrive®Connect making it easier to perform commissioning, operation, monitoring, and maintenance tasks
Back-channel cooling concept reduces costs, energy consumption, and the size of the cooling system
New ‘ruggedized’ design reduces the potential negative effects of vibration
The need for PLC capacity is reduced thanks to Smart Logic Control
Low lifetime costs are ensured as the drive is highly resistant to wear and tear
The lifetime of electronics is prolonged due to back-channel cooling for enclosures D, E, and F
Commissioning and upgrades are easy due to plug-in technology
High-precision position and synchronization thanks to the availability of Integrated Motion Controller throughout the entire product range
Features such as intelligent heat management, Safe stop, and Safe Torque Off ensure safe and energy-efficient operation of the drive
VLT®Motion Control Tool MCT 10 offers a customized commissioning experience

Omron is a manufacturer of control equipment, factory automation systems, electronic components, automotive electronics, ticket vending machines, and medical equipment.

Featured Products:
Omron Sensor E3JM-R4R4-G OMS
– Photoelectric sensor, polarized retro.reflective, 4m, AC/DC, transistor output PNP

Specifications:
Shape: Cuboid
Sensing Method: Retro-reflective
Sensing distance; 4000mm
Setting Method: Fixed
Connection Method: Terminal block
Output Type: PNP
Operation Mode: Dark-On, Light On
Response Time: 5 MS
Material Housing: ABS
Thread Size: Other
Type of Light:  Polarized  red light
Power Supply  Voltage: 12-240V
Features : Conduit PG13.5, M.S.R, Multi-Voltage Power Supply, Reflector  E39-R1 included

Sensor Photoelectronic E3Z-D87
– with Built-in Amplifier with New Connector Options E3Z Compact Sensor Offers Long Sensing Distance and Superior

Specifications:
Shape: Square Type
Sensing Distance: White paper 300 x 300 mm: 1m
Differential Distance: 20% max  of sensing  distance
Light Source: Infrared  Led (680)mm
Power Supply Voltage:  12 to 24 VDC 10% ripple (p-p)  10% max

Proximity Switch
Specifications:
Sensing Method: Inductive
Sensing Distance: 5 mm
Output Configuration: NPN
Description/Function: NO
Height: 22.7mm
Length: 49.2mm
Series: TL-M
Width: 17.5mm
Maximum Operating Temp: +70C
Minimum Operating Temp: -25 C

Thermo Controller E5CC-QX2ASM-800
– Omron’s E5CC range of temperature controllers is a premium PID based controller that support a wide variety of applications. Covering a comprehensive array of sensor inputs including a universal input, Thermocouple, PT as well as Analogue current/voltage inputs. The E5CC range of temperature controllers offers various configurations to exactly suit your program and application requirements for a reliable and easy to use system. The controller’s compact 48 x 48 mm unit is an industry-standard size and can fit into most typical system units for a fast and effortless installation. Featuring a large white PV display, the E5CC’s large 15.2 mm LED characters provide increased visibility in any application.

Specifications:
Supply Voltage: 100 240V ac
Size: 48 x 48mm
Number of Outputs: 1
Minimum Operating Temperature: -10C
Maximum Operating Temperature: +50C
Range: 0 +260 (Infrared Temperature Sensor) °C, 0 10 V, 0 20 mA, -200 +2300 (Thermocouple) °C, -200 +850 (Platinum Resistance Thermometer) °C
Series: E5CC
Input Type: Universal
Display Colour: White
Panel Depth: 72.1MM

Limit Switch WLCA2
– Oil-tight, waterproof, and dustproof cast aluminum body construction to IP67
– Two sets of snap-action contacts: N/C and N/O
– Contact rating: 10A (Ith250Vac) max. 600ac, 250Vdc
– Four position turret head
– Operating temperature range: – 10° to +80°C
– Set position indicator plate for easy maintenance
– Conduit entry PG13

Specifications:
Actuator Type: Roller Lever
Pole and Throw Configuration: SPST
Normal State Configuration: NO/NC
IP Rating: 1P67
Maximum Current: 10 A
Maximum AC Voltage: 500V
Maximum DC Voltage: 250V
Connection Type: M20
Series: WL
Contact Type: Snap Action
Terminal Type: Screw
Length: 40mm

Limit Switch Z15GM22B
– The Z series of basic switches from Omron is in plastic housing however still provides the same electrical and mechanical switching capability and lifetime as standard limit switches. These basic switches are ideal for use in uncritical environments or when separately encased in subassemblies.

Specifications:
Actuator Type: Roller  Lever
Pole and Throw Configuration: SPDT
Normal State Configuration: NO/NC
IP Rating: IP00
Maximum Current: 15A
Housing Material: Thermosetting Resin
Maximum AC Voltage: 500v
Maximum DC Voltage: 250V
Connectio0n Type: Screw
Contact Type: Snap Action
Terminal Type: Screw
Length: 49.2 mm
Width: 39.4mm
Minimum Operating Temp: -25C
Maximum Operating Temp: +80C
Depth: 17.45mm
Mechanical Life Minimum: 20000000 Operation

Fiber optic Sensor E3XNA11V2M
– PBT housing, PC cover. IP50
– For use with Omron E32 Fibre Optic Cable
– High speed version, ideal for labeling and production line applications
– Pre-wired versions for single application. Connector versions for multiple amplifier applications to provide wire and connection saving

Product Specifications:
Output Type: NPN
Terminal Type: WireLead
Response Time: 200 us
Light Source: Red Led
Electrical Connection: Pre-Wired Cable
Power Consumption; 840mW
Switching Frequency: 60hz
IP Rating: IP50
Housing Material: PBT
Supply Voltage: 12 -24V DC
Lentgh: 159.2mm
Width: 12mm
Depth: 33mm
Minimum Operating Temp: -25C
Dimensions: 159.2 x12 x 33mm

Schneider Electric is a European multinational company providing energy and automation digital solutions for efficiency and sustainability. It addresses homes, buildings, data centers, infrastructure, and industries, by combining energy technologies, real-time automation, software, and services.

Products:
Illuminated Green Push Button Harmony 9001k
– A selection of Harmony Style 9001K series of chromium-plated metal control and signaling units designed for use in the most extreme environments. Supplied with several different profile coloring heads including red, orange, and yellow which can be used to identify different functions to the user.

Specifications:
Push Button Colour: Black, Blue, Green, Orange, Red, White.  Yellow
Cutout Diameter: 30mm
Series: Harmony 9001K
Push Button Actuation: Momentary
Contact Configuration: NO
Push Button Style Octagonal
Illuminated: NO
IP Rating: IP66
Maximum AC Voltage  240V
Maximum DC Voltage 125V
Mounting Type: Panel Mount
Maximum Operating Temperature:+70°C
Minimum Operating Temperature:-25°C
Terminal Type: Screw

XB5 Illuminated  Push Button SPDT Spring Return
– Operating temperature from -40°C to 70°C
– High chemical robustness
– High vibration resistance with shake-proof terminal screws
– Large set of accessories to customize your panels
– Various types of connection are available: screw clamp, connector, Faston connector, spring terminal, or printed circuit board

Specifications:
Push Button Colour: Red, Green
Cutout Diameter: 30mm
Series: XB5
Push Button Actuation: Momentary
Contact Configuration: SPDT
Push Button Style: Round
Illuminated: Yes
Maximum AC Voltage: 600V
Maximum DC Voltage: 600v
Mounting Type: Flush Mount
Push Button Diameter:36.6mm
Maximum Operating Temperature: +70°C
Maximum Current: 6A
Minimum Operating Temperature: -40°C
Push Button Material: Plastic
Terminal Type: Screw

Pilot Lights, XB4-B
Providing functions to machines and panels, Schneider Electric combines performance with an attractive design in the XB4 22 mm pilot light series. Reinforced with flushed mounting kits, this series is quick and simple to install. Modular design means these lights are adaptable and flexible even in the most demanding environment. Harmony XB4 light series also offers a wide variety of solutions, materials, LED color, connection, and fixings as well as accessories to customize panels. Connection types available include screw clamp, faston connector, spring terminal, and printed circuit board.

Harmony XB4, Panel Mount Red LED Pilot Light Metal Indicator- XB4BVB4
Specifications:
Voltage Rating: 24V ac/dc
Pilot Light Colour: Red
Cutout Diameter: 22mm
Lamp Type: LED
Mounting Type: Panel Mount
Terminal Type: Screw
Series: Harmony XB4
Current Rating: 18mA
Body Material: Metal

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer a quick simple setup while maintaining compliance with international standards.

TeSys LC1 3 Pole Contactor- LC1D09F7
– The Schneider Electric LC1D09F7 model is a 3 pole contactor featuring a 110 V ac operating coil, with an AC-3 full load current rating of 9 A.

Specifications:
Coil Voltage:110V AC
Number of Poles: 3
Contact Current Rating: 9 A
Power Rating: 4 KW
Range: TeSys D
Series: LCID
Normal State Configuration: 3NO
Contact Voltage Rating: 690 V ac
Number Of Auxiliary Contacts: 2
Terminal Type: Screw
Maximum Operating Temperature:+60°C
Width:45mm
Length: 77mm
Minimum Operating Temperature:-5°C
Depth: 84mm

Electric TeSys D LC1D 3 Pole Contactor- LC180F7
– The Schneider Electric LC1D80F7 model is a 3 pole contactor featuring a 110 V ac operating coil, with an AC-3 full load current rating of 80 A.

Specifications:
Coil Voltage: 110V AC
Number of Poles: 3
Contact Current Rating:80 A
Power Rating:45 kw
Range: TeSys D
Series: LC1D
Normal State Configuration: 3NO
Contact Voltage Rating: 1 kV ac
Number Of Auxiliary Contacts: 2
Terminal Type: Screw
Minimum Operating Temperature: -5°C
Maximum Operating Temperature: +60°C
Depth: 125mm
Length: 127mm
Width: 85mm

TeSys D LAD Series Pneumatic Timer LADR2
– Commercial/industrial settings such as factories, warehouses, or distribution
– Domestic electromechanical units such as washing machines, ovens, etc.
– Lighting systems/security systems

Specifications:
Range: TeSys
Timer Function: Analogue (OFF Delay)
Timer Range: 0.1 → 30s
Series: D
GG fuse 10 A rating | 10 A gG conforming to IEC 60945-5-1
VDE 0660, NF C 63-140, IEC 60947-5-1, EN 60947-5-1 & BS 4794 standards
CSA, UL certified
TH protective treatment conforming to IEC 60068

Motor Circuit Breaker
– Protecting your motors from faults such as an overload of high voltage, short circuits, or relay shutdowns is vital in an age where any downtime can be detrimental to a business and its operations. Schneider Electric has built a reliable, robust series known as the GV2M series of Motor Protection Circuit Breaker to act as an intermediary between your devices, protecting vital equipment in the event of unforeseen incidents

Circuit Breaker- GV2ME08
Specifications:
Range: TeSys
Motor Protection Component: Circuit Breaker
Current Rating: 2.5 → 4 A
Overall Length: 89mm
Overall Width: 44.5mm
Overall Depth: 78.2mm
Series: GV2M

Altivar ATV212 Variable Frequency Drive (VFD) – ATV212HU15N4
– The Altivar ATV212 inverter drive is a recently updated version of the earlier version ATV21 variable speed motors from Schneider Electric. This VFD drive has an output frequency control of 0.5 to 200Hz, The Altivar 212 HVAC drive has been built for performance, intelligence, and protection.

Specifications:
Power Rating: 1.5Kw
Phase: 3
Supply Voltage: 400 V Ac
Current Rating: 3.7A
Output Frequency: 0 → 200Hz
For Use With Asynchronous Motors
Ambient Temperature: 0 → +40°C
Overall Width: 105mm
Overall Length: 143mm
Overall Depth: Overall Depth
Control Panel: Yes
Field Bus Communication Type: Apogee P1, BACnet, Metasys N2, Modbus
Filter Included: Yes
IP Rating: IP20

Bray is a company offers monitors, filter regulator, positioners, solenoids, scotch yoke, and pneumatic products. Bray International operates worldwide.

Valves
– A valve is a device or natural object that regulates, directs, or controls the flow of a fluid by opening, closing, or partially obstructing various passageways. Valves are technically fittings but are usually discussed as a separate category

Resilient Seated Butterfly Valve
Specifications:
Size Range- 2 – 20″ (50 – 500mm), 14”-20” (350mm-500mm
Temperature Range: -20°F to 400°F (-29°C to 204°C)
Pressure Ratings: 175 psi (12 Bar)
150 psi (10 Bar)

High-Performance Butterfly Valve- McCannalok
Specifications
Size Range: 2½ – 66″ (65 – 1650mm)
Temperature Range: -62°F to 500°F (-52°C to 260°C)
Pressure Ratings:ASME Class 150, 300, 600, EN 1092, PN10, PN16, PN25, PN40, PN63, PN100
Body Materials: Carbon Steel, Stainless Steel, Nickel Aluminum Bronze
Stem Materials: Stainless Steel
Seat Materials: RTFE with Resilient Energizer, PTFE with Resilient Energizer, Fire Safe: RTFE, and Inconel® with Resilient Energizer
Disc Materials: Stainless Steel, Nickel Aluminum Bronze

Stanley is a manufacturer well-known for hand tools and storage products.

Products:
Knives and blades
Screw Drivers
Pliers
Wrenches

Lighting
– equipment in a home, workplace, studio, theater, or street that produces light.

Emergency Exit Lights
– are designed to guide people to safety during an emergency. Emergency exit lights are a stand-alone system, which means they will stay lit during a power failure.

LED Bulbs
– they are tiny semiconductors (diodes) wrapped in plastic to protect the elements and focus the light. They are frequently used  in domestic, commercial, and industrial areas.

LED Tube Lights
– these LEDs are made up of three different components groups: the electrical components, the optical components, thermal and mechanical components. LED tube lights can offer you bright and efficient light with longer lifespans compared to fluorescent equivalents.

CFL Bulbs
– CFL or Compact Fluorescent Lamps are energy-saving bulbs consisting of a fluorescent tube that has been made into a shape the same size as a traditional incandescent light bulb.

UV Light Bulbs
– UV light bulbs are fluorescent tubes with a dark blue or purple filter to remove other parts of the spectrum and leave just UVA light. UV (ultraviolet) light bulbs are often referred to as black light bulbs, or BLB (blacklight blue) bulbs. UV lights feature small wavelengths that are measured in nanometers (nm).

Smart Bulbs
– smart bulbs are an internet-capable LED light bulb that allows lighting to be customized, scheduled and controlled remotely. Many types of smart bulbs enable the home or building manager to control brightness as well as RBG color.

Personal Protective Equipment (For Face & Head)
– is protective clothing, helmets, goggles, or other garments or equipment designed to protect the wearer’s body from injury or infection. The hazards addressed by protective equipment include physical, electrical, heat, chemicals, biohazards, and airborne particulate matter.

Products:
Face Shield
KN95 Mask
Surgical Mask
Safety Goggles

Personal Protective Equipment (For Hands & Footwear)
– is protective clothing, helmets, goggles, masks, gloves, footwear, or other garments or equipment designed to protect the wearer’s body from injury or infection. The hazards addressed by protective equipment include physical, electrical, heat, chemicals, biohazards, and airborne particulate matter.
– safety gloves are designed to keep you safe from hazards including cuts, chemical burns, abrasion, crushing, or contact with bio-hazards

Products:
Nitrile Gloves
– they are the most popular glove type in our range and offer superior strength, dexterity, and resistance to oils and aqueous chemicals in comparison to vinyl or latex. For these reasons, they are often used in the medical, laboratory, and manufacturing industries.

Latex Gloves
– Latex disposable gloves are a popular choice in both the Industrial and Medical industries and are widely used in applications in medical and dental, child care and senior care, food service and food processing, janitorial and sanitation, automotive, and manufacturing industries.

Vinyl Gloves
– Medical tasks, food handling, chemical and oil industries, and also painting tasks can benefit from the use of vinyl gloves. They are effective in protecting against oily substances, acid, emulsions, and other liquids and serve well in food preparation where cross-contamination needs to be kept to a strict minimum.

Safety Shoes
– A steel-toe boot is a durable boot or shoe that has a protective reinforcement in the toe which protects the foot from falling objects or compression. Although traditionally made of steel, the reinforcement can also be made of a composite material, a plastic such as thermoplastic polyurethane or even aluminum.

Infrared Thermal Scanner
– An Infrared thermal scan (or thermography/thermal imaging) is non-invasive, uses no radiation, a procedure that detects, records, and produces a careful analysis and image of skin surface temperature patterns (body heat) as a reflection of normal or abnormal human physiology.

Thermal Imaging
– Thermal imaging uses a sensor to convert the radiation into a visible light picture. Not only does this picture help us identify objects in total darkness, or through dense smoke, but the sensor information can be used to measure temperature differences as well.